No Loss -Carbide charge
No gas is lost or wasted while charging the carbide because that section is completely sealed off from the generator by a high pressure hydraulically operated valve.All the above controls are automatic and require no attention from the operator. There is a further safety device, in terms of an alarm bell, which will ring continuously till the fault is corrected.
Sanghi Valves for cylinders
Oxygen / Nitrogen / Acetylene / Argon Cylinder valves with SS304 spindle & Teflon. This cylinder valve is fixed to a gas cylinder by screwing & its essential functions are as under :
– To enable filling of gas into the cylinder.
– To ensure proper storage of the gas – inside the gas cylinder.
– To release the gas as and when – required.
– To act as a safety device for the cylinder if valves are provided with safety.
High Pressure Drier
This consists of a battery of three high-pressure vessels. The first is filled with metal filler, while the second and third are filled with anhydrous calcium chloride. It is very important that the high pressure drier is fully filled up with Calcium Chloride, as any voids in high- pressure area are against the required safety.
Induced draft Rotary sprinklers in FRP casings with electric motor 3 HP / 960 RPM with or without basin in different capacities from 500 LPM to 1000 LPM.
This consists of a battery of 60 filling connections to connect to the gas cylinders. Non- return valves are provided in various sections of the pipeline to the filling manifold. These non- return valves are extremely important for the safe operation of the plant and should be periodically cleaned to remove rust and scales, (iron cause fire). The cylinder filling pig tails (flexible hose pipes) should also be periodically cleaned to ensure that they; do not burst during filling operation, (if they do burst, a fire would ensure due to sudden discharge of Acetylene).